
Connection with water bottle adapter (drinking device) OR 030002.Visor treated with a special coating resistant to chemical attack.Most importantly SGE masks have been certified using the harmonised standard EN136:1998.
#NATO GAS MASK SERIES#
The full-face masks of the SGE series are Personal Protective Equipment that fall into category III with regard to the European Regulation 2016/425 and subsequent amendments. Controlled air flow system prevents fogging even in rigid temperatures. Can be used with all standard 40mm NATO threaded filters in compliance with EN 148-1 (DIN 3183) and with powered respirators and airlines. Six strap harness with quick release system. 3 standard threaded fittings for filter connection (standard EN148-1 or 40 mm DIN3183). Lightness in terms of weight: 710 grams (size S/M) and 750 grams (size M/L). Polycarbonate, transparent (92% visible light transfer), ballistic visor treated with a special coating resistant to chemical attack. Soft anallergic silicone face seal with double bellow shape for unparalleled comfort. When used as a particle (virus/dust) filter, the filter is good until it becomes difficult to breathe through it (it becomes clogged by particles) When using as protection from toxic gases it is recommended to change filters every day in contaminated area but when using against non-toxic gases such as tear gas or pepper spray, the filter can be used until you smell gas and to get out of the contaminated area.The SGE 400/3 Gas Mask has multi-purpose applications and the following are their main characteristics: Use: The protection time for the gas filter is at least 100 hours of use against chemical agents but the recommendation (for soldiers) is to change filters every day in a suspected contaminated area. The filter housing is sealed inside with 2 plastic plugs at each end that should be removed before use and can be put back when not in use Storage: Store at temperatures between -20 and + 50 ☌ and RH <80% Particle Filter part: P3 RD type, Contains hydrophobic glass fibre paper, protects against not highly volatile solid and liquid particles, protects against all type of particles /dust, fumes, fog, spray, asbestos, bacteria, viruses, and radioactive pollution. It is a combined Class 2 filters for gas protection and particle filters Class P3 RD in conformity to EN14387:2004 + A1:2008, CE Marked.Īttention! Provides no carbon monoxide protection in case of fire. Thread: According to EN 148-1 (RD 40mm x 1/7”)įilter Class: Comply with the EU Regulation 2016/425 (PPE). Size: Maximum diameter of 115 mm, minimum 103 mm,
The 40mm screw-on filter is made of dark gray polymer container with high mechanical strength that can withstand: oil, and decontaminants and can be used with any full-face or half-face protection masks with RD 40-1/7” thread, for example, MESTEL SGE 400/3 and equivalent masks. This filter is made to Government specs of high mechanical strength in dark gray polymer. Marking R means that the filter is reusable for more than one time. Nuclear: Radioactive solid and liquid particles.Ĭhemical: Against organic vapours having boiling point higher than 65 ☌, inorganic gases and vapours, Sulphur Dioxide (SO), Ammonia (NH) and its derivatives, dust, fumes, aerosols, particles and mist. This Anti Riot NBC filter protects against all known Anti-Riot chemicals and biological (viral) warfare agents, as well as: Eftersom halva tiden har gått är det halva priset på dessa. Tillverkningsår: Filtren i vår senaste leverans är tillverkade i juli 2020 och har en giltighetstid på 5 år till juli 2025.
Ger ett gott skydd mot nervgaser, bakterier, virus och radioaktivt stoff, Vätgas, cyanid, klorcyanid (ClCN), sarin och klorpikrin (tri-kloro-nitro-metan). Exempelvis skyddsmask 90.įiltret klarar NATO kravet “Triptych”. Filter med 40mm gänga som är Nato standard och kan användas med valfri skyddsmask som passar.